Stainless Steel Round Bar

42CrMo4 is a steel for quenching and tempering, which has a good combination of strength and toughness in the quenched and tempered condition. After the oil quenching, the steel will be through hardened up to ø60 mm bar diameter. The microstructure of larger dimensions is not fully martensite

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

34CrNiMo6 is a quenching and tempering steel with high strength, high toughness and good hardenability. Used for large axles, machine components, tools and high strength fasteners. The steel can be induction hardened and it is weldable under certain conditions.
Applications. AISI 4340 alloy steel is mainly used in power transmission gears and shafts, aircraft landing gear, and other structural parts

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Rods Bars Forged Shafts Shafting 6 mm to 2500 mm diameter
Cold Drawn Bright Hexagon Bar, Square Bar, Rectangular Bar, Round Bar
SA479 Grade 201, 202, 304, 304L, 304H, 304LN, 309, 309S, 310, 310S, 316, 316Ti, 316L, 316H, 316LN
SA479 Grade 321, 321H, 347, 347H, 317L, 317LN, 410, 410S, 416, 420, 420F, 430, 431
SA276 Grade 201, 202, 304, 304L, 304H, 304LN, 309, 309S, 310, 310

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

ASTM A182 F92 is a forging material specification for 92 grade stainless steel and is used for manufacturing bare forgings or forged and machined products for applications involving high temperature service.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Steel grade 34CrMo4 is an alloy steel intended for quenching and tempering and produced according to the requirements of ISO 683-2 and EN 10083-3. Classification: Alloy steel. Products: Semi-finished products, plates, wide strip, forgings, tubes, rolled sections, wire rod, and wire.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

ASTM A182 F6NM is a martensitic stainless steel that offers an excellent zero notch ductility as well as excellent weldability and corrosion resistance.
It is the standard specification for forged or rolled alloy and stainless-steel pipe flanges, as well as forged fittings and all types of parts and valves for high-temperature service. This standard applies to forged low-alloy steel and stainless-steel pipe parts that are used in pressure systems.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

A479 specifically refers to use in boiler and pressure vessel applications. A276 specifically defers bars for reforging and free machining grades to other ASTM standards (A314 and A582/A582M) while A479 is silent on those items and they are presumed to not be covered.
This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

SAE 8620 Alloy Steel is a low alloy nickel, chromium, molybdenum case hardening steel, generally supplied in the as-rolled condition with a maximum hardness HB 255max. SAE 8620 alloy steel offers high external strength and good internal strength, making it highly wear-resistant.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

34CrMo4 Steel is a high quality Quenched and Tempered Alloy Structural steel, It belong to the high quality low carbon,Low alloy chromium, molybdenum, nickel case hardening steel. Oil Quenched & Tempered Hardness is 18-22 HRc. Annealing delivery hardenss less than 250HB.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

specifications:

• size - dia 6 mm - dia 80 mm bright
• size - dia 85 - dia 300 mm black
• material - case hardening steel
• material grade - sae 8620
• usage - gears / pinions 
• single pc. Length - 3 mtr - 6 mtrs.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

It higher degree of chromium (which helps the steel resist corrosion) than other forms of stainless steel. It also has good weldability and formability, making it ideal for use in many applications that require welding or forming.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

42CrMo4 is a heat treatable steel which contains at least 0.9%Cr,0.15%Mo as strengthening elements. After quenched and tempered, It obtains high strength, good low-temperature impact toughness with a typical tensile strength of 900 -1200 N/mm2.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

EN24 AISI:4340 817M40 34CrNiMo6 40NiCr4Mo3 Bright Steel Bar
EN24 is a Nickel Chromium Molybdenum alloy steel specification widely used in the oil and gas sectors. EN24 steel offers toughness and high strength in the heat treated condition, with good fatigue strength.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

 This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boilers and pressure vessel construction

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boilers and pressure vessel construction.

• Delivery Time: ready stock
• Packaging Details: as per clients requirement

Application. Aluminum alloy wire rods can be applied in mechanical industries, such as bolts, nuts, nails, needles, rivets, clips and staples. Aluminum alloy wire rod is also the most widely available bike components and affordable choice for racing and mountain bike frames.

• Aluminium is an extremely versatile metal with a number of advantages, it is recognised for being both lightweight and flexible. ...
• Light Weight
• Corrosion Resistanc

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Established in 1994 at Mumbai, Maharashtra, R M METAL INDUSTRIES is one of the leading Manufacturer and Impoter, Supplier of Stainless Steel Pipe, Stainless Steel Sheet, Stainless Steel Plate, Stainless Steel Coil etc and many more. Under the capable guidance of the Director Sales Mr. Mukesh Shah, who comes with an experience of over 20 years, we have carved a niche for ourselves in this domain.

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

It can be used to make rolling contact stainless bearings, e.g. ball bearings and roller bearings. It is also used to make knife blades. 440C has the highest strength, hardness, and wear resistance of all the commonplace 440-series stainless alloys, with high carbon content and moderate corrosion resistance.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

It  is a high carbon martensitic stainless steel containing good strength, moderate corrosion resistance and ability to obtain and maintain wear resistance and excellent resistance.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

The application of hardness testing enables you to evaluate a material's properties, such as strength, ductility and wear resistance, and so helps you determine whether a material or material treatment is suitable for the purpose you require.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

16 MnCr5 steel is alloyed case hardening engineering steel, used to manufacture piston bolts, camshafts, levers and mechanical engineering components.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

ASTM A182 F12 CLASS 2 is a forging material specification for F12 CLASS 2 grade stainless steel and is used for manufacturing bare forgings or forged and machined products for applications involving high temperature service.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

410 stainless steel is widely used in various industrial applications, including construction, automotive, aerospace, and food and medical industries. Its combination of corrosion resistance, strength, and hardness make it an excellent choice for a wide range of applications

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction

• Delivery Time: ready in stock

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

 This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Established in 1994 at Mumbai, Maharashtra, R M METAL INDUSTRIES is one of the leading Manufacturer and Impoter, Supplier of Stainless Steel Pipe, Stainless Steel Sheet, Stainless Steel Plate, Stainless Steel Coil etc and many more. Under the capable guidance of the Director Sales Mr. Mukesh Shah, who comes with an experience of over 20 years, we have carved a niche for ourselves in this domain.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction.

• Delivery Time: ready in stock

The ASTM A479 Type 316 alloy is very ductile and they come with high formability. These bars can be both hot or cold worked. However, several manufacturers prefer the cold worked variant as they have enhanced hardness and high tensile strength.
Round Bar is designed with utmost precision in conformity with the international quality standards. ASTM A479 316l Round Bar can be categorically said that steel bars are one of the core components of any manufacturing industry or for that matter any industry that relies on machineries.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

4140 steel is a low alloy steel containing chromium, molybdenum, and manganese. It is widely used across numerous industries and is an excellent material choice due to its toughness, high fatigue strength, and abrasion and impact resistance. Not many grades can match the versatility and usefulness of 4140.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request

Steel grade 34CrMo4 is an alloy steel intended for quenching and tempering and produced according to the requirements of ISO 683-2 and EN 10083-3. Classification: Alloy steel. Products: Semi-finished products, plates, wide strip, forgings, tubes, rolled sections, wire rod, and wire.

• Delivery Time: Immediate (If Ready Stock). 3-8 weeks for make to order basis depending on raw material availability
• Packaging Details: Wooden Box, Pallets or as per client's request